News

How to avoid clogging and odor when using a water suction vacuum cleaner to handle wet garbage?

Publish Time: 2024-06-20
When using a water suction vacuum cleaner to handle wet garbage, avoiding clogging and odor is the key to ensuring its efficient operation.

Ways to avoid clogging:

Choose the right water suction vacuum cleaner:
Water suction vacuum cleaners designed specifically for wet garbage usually have stronger suction and special filtration systems, which can handle wet garbage more effectively.

Regular cleaning and maintenance:

After each use, make sure to empty the wet garbage and sewage in the water tank and filter to avoid residue accumulation.

Clean the filter system of the vacuum cleaner regularly to prevent dust and dirt accumulation and blockage. The filter can be rinsed with clean water, then dried before installing it back into the vacuum cleaner.

Check the vacuum cleaner's pipes and suction heads regularly to make sure they are not blocked or damaged. If blockage is found, clean it in time.

Avoid sucking in large pieces of debris:

When using a water suction vacuum cleaner, avoid sucking in large pieces of debris or hard objects directly, which may block the vacuum cleaner's pipes and filters.

Pay attention to the posture and speed of use:

When using, keep the suction head moving smoothly, avoid moving too fast or too slow, so as not to suck in too much water or wet garbage and cause blockage.

Avoid putting the suction head too close to the ground or wall, which can easily lead to poor suction and blockage.
How to avoid odor:

Keep it clean:

In addition to the regular cleaning and maintenance mentioned above, make sure to thoroughly clean all parts of the vacuum cleaner after use, especially the filter and water tank, to remove any residue and dirt and reduce the possibility of odor.

Use deodorizer:

Putting some deodorizers such as activated carbon, baking soda or special vacuum cleaner deodorizers in the water tank or filter can help absorb and neutralize odors.

Replace the filter in time:

Replace the filter of the vacuum cleaner regularly according to the frequency of use and the manufacturer's recommendations. The filter is a key component to prevent odor. If the filter is damaged or blocked, it should be replaced in time.

Keep it dry:

After using the Water suction vacuum cleaner, make sure all its parts are thoroughly dried, especially the water tank and filter. A humid environment is prone to breeding bacteria and mold, which can cause odors.

Store in a ventilated and dry place:

Store the Water suction vacuum cleaner in a ventilated and dry place to avoid moisture and dust accumulation, which will help reduce odors and keep the vacuum cleaner in good condition.

By following the above suggestions, you can effectively avoid the clogging and odor problems encountered when using the Water suction vacuum cleaner to handle wet garbage, ensuring that it continues to provide you with cleaning services efficiently.
×

Contact Us

captcha